Rustproofing Receipt
The Mystical Recipe I found one very strange receipt for rustproofing in an bulgarian classic car forum. If you click the link, search for Отговор #363 (Answer #363). It sounds like a receipt for a magical shit, made by a wizard: Despite of this i have a feeling that it…
Weld the Left Rocker Panel (part 2)
Rocker Panel Inside I welded the inner side of the rocker panel. It doesn’t look good, but i hope it is strong. The trick is: Front Crossbeam Outside This is the nice surprise for today. I did it very well (as i can). I spent more time on shaping and…
Weld the Left Rocker Panel (part 1)
Adjust the Welder In the previous post i explained that welding on 3 B do not penetrate well and i switches to 4 C and the plug weldings are now OK. Re-weld Failed Weldings As i mentioned before, some of the weldings had no penetration. This is how i checked…
Sheet metal and welding thoughts
Sheet Metal I bought 16 ft2 from here. The guy i was in communication with was very king. He defined himself as Human Forklift (formerly known as “Sales”) in his email signature 🙂 He offered me to cut it to 2 pieces of 8 ft2 to decrease (~ the half) the price of…
Butt Welding Lesson
I start with the disclaimer “this is a joke”. I am not good enough to give lessons 🙂 Let’s just get some fun. At the end of the production, they made some modifications for 1.1 and produced the same body for 601. Everybody knew that The end is near, it’s…
Paint the Cavities Inside
Before welding any cavities, they need to be rust-proofed. I use a zinc primer. It can be welded. After that i will paint with an urethane paint. While uploading the images to the last 2 posts, i was looking at the background and i felt like an investigative dog 🙂
Front Beam – Shape Missing Part
I shaped the missing (cut by me) part of the front crossbeam. Next i will paint the cavities inside and i am ready to finish the welding on the bottom.
The Welding Continues
It’s getting better all the time …my welding. Slowly, but constantly. I own another issue: “measure twice (even better 3 times), cut once”. My friend who jokes all the time says “i already cut it 3 times and it’s short again” 🙂 Floor (Vertical) Left Side I flipped the car…
Clean and Grease the Windshield Wipers Engine
There is nothing interesting here. Just disassemble, clean, grease the bushing bearings and check/change the brushes.
Zinc Primer and Paint for the Floor
I bought zinc primer and paint for the underside of the floor. I need to prime and paint all the cavities (inside and outside) that i am welding now – the rocker panels. I hope that these are good quality paints, because of the crude climate in Quebec.