Back Suspension Arms, Etch Primer, Harmonic Puller (Air Turbine Belt Pulley)
When I woke up this morning I felt a pang. Not true. This is just a Primus song (see the end of the post). When i woke up this morning i looked outside and there was snow. A wet and heavy snow that bent the branches of the trees. The…
The Suspension is Primed
Prime the Suspension Parts Yesterday i took the suspension parts from sandblasting and sprayed them with epoxy primer. I learn on the fly, so i didn’t remove the front bearings and now they aren’t bearings anymore 🙂 I will replace them. What is Next I found graphite grease for the…
Punch In and Out the Pin of the King Pin on the Front Steering Knuckle
The best way to remove the pin (8mm x 32mm) and replace the king pin on the front steering knuckles (swivel bearings, wheel hubs) is by using a hydraulic press and hot temperature. This is the direction to punch out and back in. The directions are the same on both…
Slowly Moving Forward
It looks like nothing happened in the last 3+ months, but it’s not true. I moved to another town and now i have a double garage only for myself. As the move takes some money, i didn’t buy as scheduled the MIG welder and other tools and materials that will…