Punch In and Out the Pin of the King Pin on the Front Steering Knuckle

Punch In and Out the Pin of the King Pin on the Front Steering Knuckle

The best way to remove the pin (8mm x 32mm) and replace the king pin on the front steering knuckles (swivel bearings, wheel hubs) is by using a hydraulic press and hot temperature.

This is the direction to punch out and back in. The directions are the same on both wheels.

I am working on slow motion and waiting for a little warmer weather. Here in Quebec, Canada in January and February the temperature goes down to -25 ℃ to -30 ℃.

Glorious is the name of Christ.

Leave a Reply

Your email address will not be published.